Double hook 100 mm made of carbon steel. Mounts on perforated boards with the Euro-perforation system (slot holes). Two 100 mm arms hold heavier hand tools: impact wrenches, hammers, large open-end/ring spanners. JBM 16356 — a standard component of the professional workshop organisation system.
▸ TWO 100 MM ARMS — DOUBLE STABILITY FOR HEAVIER TOOLS
Single-hook holds a tool at one end only — it can rotate, fall off, and block access to other tools. Double-hook (this model) has two 100 mm arms — they hold the tool securely in a vertical position, it does not rotate, and retrieval and return are effortless. Ideal for hammers, impact wrenches, 17–32 mm open-end/ring spanners, and hydraulic pliers.
▸ Warranty: 36 months (3 years) — JBM Campllong — manufacturer's warranty covering the steel structure and chrome plating. Full availability of additional hooks in the EU catalogue.
Slot into a Euro-perforation board's slot hole — holds securely even under a heavier tool. The JBM 16356 double hook 100 mm is a standard component of the professional workshop organisation system. Made from hardened steel with anti-corrosion chrome plating, it withstands decades of daily use in workshop environments (oil, grease, humidity).
Why JBM DOUBLE HOOK 100mm (16356)?
- ✓ Two 100 mm arms — double stability compared to a single-hook. Tool does not rotate, does not fall off
- ✓ Hardened steel + chrome plating — resistance to corrosion, oils, greases, and workshop humidity
- ✓ Euro-perforation standard — fits JBM boards (SERIE446 / SERIE587 / corner extension), UltraToolz, Stahlwille, Hazet, KS Tools
- ✓ High load capacity — holds tools up to 2–3 kg (typical manual impact wrench 1700–2300 Nm, hammer 1–2 kg, heavy open-end/ring spanner)
- ✓ Quick tool-free installation — slot in, snap into place, done
- ✓ 3-year JBM Campllong warranty — premium standard for workshop accessories
Technical specification:
- Brand / Model: JBM Campllong / 16356
- Type: Double hook
- Arm length: 100 mm
- Number of arms: 2
- Standard: Euro-perforation (slot holes)
- Material: hardened steel + chrome plating
- Max. load: 2–3 kg per piece
- Warranty: 36 months (3 years)
★ Fits these boards in our catalogue:
UltraToolz Board 120×60 cm + 25 holders — basic system with slot holes (Euro-perforation).
JBM SERIE446 — modular workshop with Euro-perforation perforated panel.
JBM SERIE587 — premium corner installation with Euro-perforation on tool walls.
JBM Corner extension 22 pcs — corner add-on for SERIE446 with perforation.
Who is it for?
- • Workshop with an existing perforated board needing additional hooks for heavier tools (hammers, impact wrenches)
- • UltraToolz Board owner expanding the 25-holder set with double hooks
- • Workshop with JBM SERIE446/587 adapting the perforated panel to specific tools
- • Mechanic replacing worn hooks in an existing organisation system
- • Home garage enthusiast — organising tuning, sport-auto, and modification tools
▸ BUYING IN BULK (10+ HOOKS)?
Equipping a workshop or parts shop? Get in touch — bulk pricing for 10+ 16356 hooks + other JBM hooks in the catalogue (single, double 200 mm, magnetic, for special spanners).
▸ JBM CAMPLLONG — PRESENT IN 68 COUNTRIES FOR OVER 30 YEARS — Spanish manufacturer of professional tools. The workshop organisation accessories line (hooks, boards, EVA modules) — market standard for authorised automotive service centres in Europe.
FAQ — Frequently asked questions
How does a double-hook differ from a single-hook?
Single-hook has one arm — it holds the tool at a single point. It can rotate around its axis, fall off during removal, and spin during use. Double-hook (this model) has two arms — they hold the tool securely in a vertical position. For hammers, impact wrenches, and large open-end/ring spanners — a double-hook is essential; a single will cause problems.
What tool size does 100 mm hold?
100 mm spacing between the arms allows tools with a loop diameter of 30–90 mm to be hung (with manipulation clearance). Suitable for: 17–32 mm open-end/ring spanners (loop 25–50 mm), small/medium sledgehammers (loop 30–60 mm), manual impact wrenches (loop 40–80 mm), hydraulic pliers (loop 30–60 mm).
Does it fit the UltraToolz 120×60 board?
Yes — the UltraToolz board has dual perforation: round holes (peg-hook) and slot holes (Euro-perforation). The JBM 16356 hook slots into the slot holes. The perfect complement to the UltraToolz 25-holder set — add double hooks when you need to hang heavier tools.
Does it fit Stahlwille, Hazet, KS Tools, Wera boards?
Yes — all Euro-perforation perforated boards use standard slot holes. The JBM 16356 hook fits all European Euro-perforation workshop boards. Market standard.
How long is the JBM warranty?
The JBM Campllong manufacturer's warranty is 36 months (3 years). It covers material defects in the steel structure and chrome plating.
How will a hook weighing ~50 g be delivered?
We deliver by standard courier (DPD, GLS, InPost, DHL) within 2–3 working days. For orders over 10 units — parcel courier. For 50+ units — bulk pricing with individual shipping quote.
