90L cabin. 19.3 kg. Compact sandblaster for the workshop — rust and paint disappear without chemicals.
▸ CAPACITY 90L — for discs, calipers, brackets, and body parts
▸ JBM manufacturer warranty — Spanish brand present in 68 countries for over 30 years
▸ ONLY 19.3 KG — compact and easy to use, fits in any workshop
Rust on calipers, old paint on brackets, burrs on castings — chemical rust removers work only on the surface and leave residues. The sandblaster removes everything down to clean metal in minutes. The JBM 54563 with a 90L cabin is a compact tool for a one-person workshop and light industrial use: lightweight (19.3 kg), easy to operate, ready to work after connecting the compressor.
Why choose the JBM 90L Sandblaster?
- ✓ 90L cabin — fits brake discs, calipers, brackets, and small body parts
- ✓ Weight 19.3 kg — can be moved alone, no cart needed
- ✓ Pressure adjustment 40-120 PSI — from gentle aluminum cleaning to aggressive steel rust removal
- ✓ Sand tank 6.5L — enough for several sessions without refilling
- ✓ Granulation 60-80 MESH — optimal for metal, does not damage surfaces
- ✓ Compact dimensions 580×485×494 mm — takes up little space in the workshop
Specifications:
- Cabin capacity: 90L
- Sand tank capacity: 6.5L
- Cabin dimensions: 580×480×305 mm
- Total dimensions: 580×485×494 mm
- Recommended granulation: 60-80 MESH
- Airflow rate: 40-120 PSI
- Lighting voltage: 12V
- Weight: 19.30 kg
- Catalog number: 54563
⚠ WARNING: The machine does not include abrasive material (sand/microbeads). Must be purchased separately.
Who is it for?
The 90L sandblaster is ideal for a one-person car workshop, motorcycle service, and any place where parts are regularly prepared for painting or anti-corrosion treatment. Smaller and lighter than the 220L model — perfect when you don’t need to sandblast large body parts.
▸ LIMITED AVAILABILITY
The machine is available in limited quantity. Need a larger model? Check out the JBM 220L sandblaster in our store.
FAQ
Does the machine include sand or microbeads?
No — abrasive material must be purchased separately. Recommended granulation is 60-80 MESH. For steel, corundum works best; for aluminum, glass microbeads.
What compressor is needed?
A compressor with a capacity of at least 200-300 L/min at 6-8 BAR pressure. A tank of at least 50L ensures continuous work without breaks.
How does this model differ from the JBM 220L?
The 90L model is smaller (19.3 kg vs 51 kg), has a smaller sand tank (6.5L vs 33L), and fits smaller parts. Choose 90L for details and small parts, 220L for large body parts.
Can aluminum be sandblasted?
Yes — at low pressure (40-60 PSI) and fine granulation (80 MESH). Aluminum is soft, so gentle settings prevent deformation.
Is there a warranty?
Yes — JBM is covered by the manufacturer’s warranty. Claims are handled in Poland.
