JBM SERIE623 — Tyre Station 380V Premium: automatic tyre changer + laser wheel balancer + workshop chair
- Tilting towerTilts back on its own and returns with automatic mounting head positioning
- Helper arm 360°Holds the bead and the rim edge — the operator does not wrestle with Run-Flat
- Turntable with 4 clampsMonolithically cast clamps, 10–21″ from the outside / 12–24″ from the inside
- Bead breaker and 4 pedalsTower, clamps, rotation and bead breaker — each on its own pedal
- Panel with laserThe laser shows the weight position, SPLIT hides it behind the spokes
- Shaft with conesAccuracy starts here — poor centring means vibration after the change
- Workshop seatPU, height adjustment — for a full shift at the peak of the season
€3.142,10 net·€3.864,78 gross·Free pallet delivery·Instalments — check with Klarna
Company with a valid EU VAT number from another EU country — 0% (reverse charge)
Three machines, one order
Three machines matched to each other, one order, one delivery. A 380 V tyre changer with automatic tilting tower and helper arm, a wheel balancer with centring laser and a workshop seat — a complete work station for a shop that handles Run-Flat, low profiles and rims up to 24″.
Tyre changer JBM 55022
380 V · automatic tilting tower · 360° helper arm with roller · 1078 Nm · 10–21″ from the outside, 12–24″ from the inside · wheel up to 1000 mm and 355 mm wide · 4 pedals · cast clamps · 8–10 bar · 1,10 kW · 298 kg
Laser wheel balancer JBM 54970
Centring laser · measuring arm · brake pedal · ±1 g · 8 s cycle · 200 rpm · ALU-S/1/2/3 + SPLIT · 10–24″ · rim width 1,5–20″ · wheel up to 65 kg · <70 dB · 126 kg
Workshop seat JBM 53956
PU · 360° swivel · height adjustment · 200 kg load capacity
Eight reasons a station like this gets bought
The machine, not a presentation
No voice-over and no music — panel, display, laser, measuring arm, mounting a wheel and applying a weight.
Run-Flat without a struggle and without scratches on the rim
The helper arm is not an extra
On Run-Flat and low profile tyres the stiff sidewall will not be pressed down by hand. The 360° helper arm with a nylon roller holds the bead and the rim edge in place — the operator does not fight the tyre, and the rim edge takes no damage. The pneumatic arm alone costs 1 045,50 € as a JBM spare part — that is what this feature is worth.
Automatic tilting tower
The column tilts back pneumatically and returns to the working position with the mounting head automatically positioned over the rim. Fewer movements on every wheel, fewer chances to scratch the rim.
1078 Nm — on the turntable, not in an ad
This is the torque of the plate: the force with which the turntable drives the tyre over the rim. Four pedals (tower, clamps, rotation, bead breaker), monolithically cast clamps, worm gear drive.
Range for premium rims
10–21″ from the outside, 12–24″ from the inside, wheel up to 1000 mm (40″) and up to 355 mm wide. The figures are for steel rims — alloy rims are thicker, so treat them as a guide.
Rim protectors are available as genuine parts
JBM lists a full set of plastic protectors for this machine: bead breaker blade cover (17580), mounting head protectors (17583, 17584), complete plastic union (17642), clamp covers (18264). For many machines on the market such parts simply do not exist, and after a year there is nothing to replace a worn protector with. Here they exist — from the manufacturer catalogue, with a part number.
So the customer does not come back with a vibrating steering wheel
The most common comeback in a tyre shop is “the steering wheel shakes after the change”. Usually it is not the imbalance itself, but how the wheel sat on the shaft and where the weight ended up.
Centring laser
A bright line shows exactly where the weight has to go — instead of judging by eye. Fewer corrections, fewer weights used, more often a result on the first spin.
Measuring arm
The machine takes the offset and the diameter itself. You do not type numbers in by hand, so there is no size error to ruin the whole measurement.
ALU and SPLIT
ALU-S, ALU-1, ALU-2 and ALU-3 place adhesive weights on alloy rims, and SPLIT divides the weight and hides it behind the spokes — on an expensive rim you cannot see that the wheel was balanced. A steel clip on aluminium means a scratch and corrosion; an adhesive weight in a well chosen plane does not.
Brake pedal
Holds the wheel still while you stick the weight on. On a 24-inch rim that is the difference between calm work and fighting the mass of the wheel.
Centring on the cone
Accuracy starts here. ±1 g, 8 s cycle, 200 rpm, wheel up to 65 kg, below 70 dB. Low speed with a large wheel means calmer and safer work.
What changes in your working day
- The wheel goes on the shaft once — the laser shows the point, the weight goes straight to the right place.
- The size is not typed in by hand, so there are no mistakes in the measurement.
- The stiff sidewall of a Run-Flat does not stop the machine and does not force the operator to strain.
- The weight on a premium rim is invisible — the customer has nothing to ask about.
- Three machines arrive together and work from the first day of the season.
No promises of “payback in X months” — the real result depends on how busy the workshop is.
Numbers you can check in the manual
| Zasilanie | 380 V / 3 fazy |
| Moc | 1,10 kW |
| Ciśnienie robocze | 8–10 bar |
| Moment stołu | 1078 Nm |
| Mocowanie od zewnątrz | 10–21″ |
| Mocowanie od wewnątrz | 12–24″ |
| Maks. średnica koła | 1000 mm (40″) |
| Maks. szerokość koła | 355 mm (14″) |
| Hałas | <75 dB |
| Waga | 298 kg |
| Wymiary | 880 × 435 × 1880 mm |
| Zasilanie | 220 V / 50 Hz |
| Moc | 200 W |
| Dokładność | ±1 g |
| Czas cyklu | 8 s |
| Obroty | 200 obr./min |
| Zakres średnic | 10–24″ |
| Szerokość obręczy | 1,5–20″ |
| Obciążenie maks. | 65 kg |
| Programy | ALU-S / ALU-1 / ALU-2 / ALU-3 / SPLIT |
| Hałas | <70 dB |
| Waga | 126 kg |
| Wymiary | 1178 × 918 × 1664 mm |
Space in the shop (from the JBM manual): 500 mm behind the machine for the tower to tilt, 500 mm on the left, 700 mm on the right.
How ~445 kg gets to you
Ask about unloading and lead time →
Whether parts exist matters more than the length of the warranty
JBM manufacturer warranty: 12 months from the shipping date (wear parts are not covered). Plus the statutory EU warranty of 24 months.
Parts are available from the JBM catalogue: mounting head (17585), plastic union (17642), head protectors (17583, 17584), bead breaker cover (17580), clamp covers (18264), seal kit (18261), 5-way valve (18262), complete helper arm (18260). A machine you can no longer buy anything for after two years costs more than one that has parts.
Frequently asked questions
Do I need a 380 V supply?
Will it handle Run-Flat and low profile?
Will it scratch an alloy rim?
What does the laser in the balancer do?
What warranty?
How much space is needed?
What compressor?
How does it arrive and who unloads it?
EU VAT invoice for a company?
Can it be returned?
A tyre service station in one order
Write for a proforma invoice or ask about unloading and lead time. We answer to the point, with no obligation.
No obligation — we answer to the point. The decision is yours.
