FORCE 10318-607 · Professional Tools

FORCE 8/8 tool trolley — 607 tools and four drives

607tools
8 / 8full drawers
4drives 1/4"–3/4"
950 mmwidth
3 yearswarranty
Request a proforma
€3.186,95 netto ·  cena katalogowa w Europie Zachodniej 15 300 zł netto  ·  dostawa paletowa 2–3 dni
FORCE 10318 tool trolley — 8 drawers
Push handle
Move it one-handed
Roll over 200 kg of kit to the bay without help
Side shelf
Small parts to hand
Removable tray for the bolts and spanners currently in use
Four castors · two braked
Locked at the bay
The trolley stays where you leave it
Composite worktop
Work surface
With two spray can holders
Central lock
One key for everything
More than one drawer at a time is blocked — the trolley won’t tip over
8 drawers · full extension
Ball-bearing slides
7 drawers 60 mm + 1 tall 120 mm, full extension even when loaded
FORCE 10318 tool trolley
  1. 1
    8 drawers · full extension
    Ball-bearing slides
    7 drawers 60 mm + 1 tall 120 mm
  2. 2
    Central lock
    One key for everything
    Only one drawer open at a time — the trolley won’t tip over
  3. 3
    Composite worktop
    Work surface
    Two spray can holders
  4. 4
    Side shelf
    Small parts to hand
    Removable tray
  5. 5
    Braked castors
    Locked at the bay
    2 fixed + 2 swivel with brake
  6. 6
    Steel + powder coat
    Resistant to oil and grease
    Electrostatic coating
Contents

Eight drawers — all full

Every tool has its own cut-out in two-colour foam. A missing piece shows at a glance, without counting.

Drawer 1 Click to enlarge
Drawer 1 — drives 1/4" + 3/8" + bits + L-keys
Two precision drives in one drawer. Sockets 1/4" 4–13 mm, standard and deep, sockets 3/8" 8–22 mm, over 80 bits (Phillips, Pozidriv, Hex, Torx, Spline, security), spark plug sockets, impact drivers, Hex and Torx L-keys in the XL set.
Honestly — who this is for

At this price we’d rather say straight out who this trolley won’t pay off for

It makes sense if

Heavy vehicles come through your workshop

  • You work on vans, trucks, semi-trailers or buses
  • You take on agricultural or construction machinery
  • You’re kitting out a second bay and don’t want to buy 3/4" separately
  • You want one source of tools with one warranty, instead of five purchases
It doesn’t make sense if

You work on passenger cars only

  • The 3/4" drive — two of the eight drawers — will sit idle
  • You’re paying for a range you won’t use
  • You’ll get the same level of car work from a set costing half as much

We’d rather sell cheaper kit once and get it right than sell dearer and have it come back as a complaint. Write to us — we’ll pick a smaller trolley for what you actually do.

Pick a set for my work
Dimensions and logistics

Before you order — check the space

950 mm 1030 mm 500 mm
  • Dimensions1030 × 950 × 500 mm per the FORCE catalogue — overall height (with castors) × width × depth
  • Drawer750 × 435 mm inside, three sections of 145 mm — dimensions from the FORCE catalogue
  • Drawer layout7 drawers 60 mm + 1 drawer 120 mm (internal depth), all full extension
  • Weight212 kg with packaging
  • DeliveryPallet delivery, 2–3 working days — contact before delivery
  • BodySteel with electrostatic powder coating, graphite colour
  • Warranty3 years — manufacturer’s warranty
Working range

Four drives means four classes of fastener — from 4 to 50 mm

You pick the drive by diameter and torque, not by the make of the vehicle. Below you can see how far this set reaches — and where trolleys with three drives stop.

1/4"
4–13 mm

Electrics, interior, small fittings. Over 80 bits and impact drivers.

3/8"
8–22 mm

Engine and ancillaries. Star E4–E18, spark plug sockets 14–20.6 mm.

1/2"
10–32 mm

Suspension, brakes, wheels. Standard, deep and a full set of Cr-Mo impact sockets.

this is where the typical trolley stops
3/4"
17–50 mm

Trucks, buses, machinery. Impact sockets to 46 mm and half a metre of leverage.

this set goes further

203 + 206 + 77 = 486 piecesacross four drives. The remaining121are combination spanners, specialist spanners and hand tools — together607.

The main difference

Where the 1/2" drive ends, this trolley is only starting

Most workshop trolleys stop at 1/2". On an axle bolt in a truck or a construction machine that drive works at its limit — and breaks. FORCE 10318-607 has the full 3/4" set: sockets, impact sockets and half a metre of leverage.

A typical workshop trolley
1/4" · 3/8" · 1/2"

Enough for cars and vans. With heavier kit you have to buy a separate 3/4" set — and make a second purchase.

FORCE 10318-607
1/4" · 3/8" · 1/2" ·3/4"

A full 3/4" set in two separate drawers: sockets, impact sockets and half a metre of leverage. Below are three situations where that counts.

Three situations where a trolley without a 3/4" drive sends the job elsewhere

1

Semi-trailer and trailer axles

Nuts and bolts in semi-trailer running gear are torqued to a level at which a 1/2" drive works at its limit. The ratchet loses calibration, the socket cracks — usually at the worst moment.

Here:sockets 3/4" 17–50 mm + 500 mm breaker bar
2

Truck hubs and wheels

Wheel nuts on trucks and buses start where a typical car set ends. Without a 3/4" impact socket you’re left with an extension bar and brute force — a risk to the thread and to the person.

Here:17 impact sockets 3/4" 17–46 mm + 17 deep, Cr-Mo
3

Agricultural and construction machinery

Implement mounts, ploughshares, frames — big, seized and rusted bolts. Torque alone isn’t enough; you need the leverage a standard trolley simply doesn’t have.

Here:T-bar 500 mm and ratchet 3/4" 24T + extension bars 200 and 400 mm
What else you’ll need

The 3/4" impact sockets are intended for an impact wrench — pneumatic or cordless.It is not included in the set.The 3/4" 24T ratchet, T-bar and 500 mm breaker bar are for controlled tightening and for undoing what gives way by hand. On a truck wheel nut torqued to 600–700 Nm the breaker bar alone won’t do it.

We say this plainly because we’d rather you knew it before buying, not after unwrapping the pallet.

Count it yourself: how many times a month do you send a job away because you haven’t the tool to take it?

This trolley isn’t about the number 607. It’s about no longer sending semi-trailers, trucks and machinery to the workshop next door.

Request a proforma
Price

What it costs with us

List price in Western Europe15 300 zł net
Our net price€3.186,95
Availabilityin stock
Pallet delivery in 2–3 daysincluded

That’s about 23 zł per tool — together with the trolley, the foam inlays and the central lock.

Request a proforma

Frequently asked questions

Does the trolley arrive assembled?
Yes, largely. The castors are left to fit. The tools are already laid out in the foam inlays — once unpacked, the bay is ready to work.
How is a trolley weighing over 200 kg delivered?
By pallet delivery in 2–3 working days. We contact you before delivery to agree the details, including unloading. Check the packaging on receipt; if there is damage, write a report with the driver and email us the same day.
Why do I need a 3/4" drive if I work on passenger cars?
On cars alone the 3/4" sits idle — in that case a smaller set is the better choice. This trolley makes sense if vans, trucks, trailers, agricultural or construction machinery come into the workshop. That is where 1/2" works at the limit of its strength.
Will the impact sockets stand up to an air wrench?
Yes. The impact sockets are made from Cr-Mo steel — a material intended for impact work. The 1/2" and 3/4" drives are standard, so they fit any pneumatic or electric wrench with the matching square drive.
Do you issue an EU VAT invoice?
Yes, automatically. For purchases from within the European Union with an EU VAT number, sale under the reverse charge (0% VAT) is possible.
What if one of the tools breaks?
The manufacturer’s warranty is 3 years and covers material and manufacturing defects. If a tool breaks during normal work, we replace it at no cost to you.

One bay instead of four purchases

607 FORCE tools, four drives and a trolley to hold it all. Ready to work on day one.

Add to cart Request a proforma

Prefer to chat? We reply in English.

Back to the contents of the eight drawers

€3.186,95 netto in stock · ships in 24 h
Request a proforma
FORCE 8/8 – Tool trolley with tools, 607 pcs in foam inlays €3.186,95 net · dispatch in 24h Message on WhatsApp